- Phosphate handling: enter paired serum and urine phosphate and creatinine with a unit for each, then the specimen context. Phosphate pairs and creatinine pairs may use different units; the tool normalizes them.
- Trend dashboard: add each result with its date, analyte, unit, assay or laboratory name and that laboratory’s limits. PTH is standardized only when the assay ULN is entered.
- Calcium ledger: list each calcium-containing product with its elemental calcium per unit from the verified label.
- Review aids: the IV iron and antiresorptive tools document and prompt; they do not score or decide.
Everything runs in your browser. Nothing is stored, sent to analytics or placed in the address bar. Do not enter names, hospital numbers or other identifiers.
When to Use — and What These Tools Do Not Do
Use with Novel Regulators and Functions in Mineral Metabolism for adults with CKD G3a–G5D and for hypophosphatemia work-up. Arithmetic is versioned in MM-CORE v1.0.0; interpretive notes come from a separate, sourced rule set (MM-RULES v0.1.0-draft) that is marked as a draft pending clinical sign-off.
Deliberately excluded
No FGF23/Klotho score or ratio, no activin A fracture predictor, no T50 inferred from calcium and phosphate, no “mineral stress index,” no automatic drug selection or dose change, no bone-turnover diagnosis, no “MBD controlled” badge, and no individual probability derived from trial or cohort rates. Calcium is never auto-adjusted for albumin, and total and ionized calcium are never converted into each other.
Renal Phosphate Handling — FEPO₄, TRP, TmP/GFR
Fractional excretion of phosphate (FEPO₄), tubular reabsorption of phosphate (TRP) and the tubular maximum for phosphate reabsorption per glomerular filtration rate (TmP/GFR) by the Kenny–Glen algorithm (Payne, 1998; Barth et al., 2000). Designed for the question “is the kidney conserving phosphate appropriately when serum phosphate is low?”
Paired sample
Specimen and patient context (drives applicability limits, not the arithmetic)
⚕ FEPO₄ (%) = 100 × (UP × SCr) ÷ (SP × UCr); TRP = 1 − FEPO₄/100; TmP/GFR = TRP × SP if TRP ≤ 0.86, else SP × 0.3 × TRP ÷ (1 − 0.8 × TRP). TmP/GFR keeps the serum phosphate unit. A low TmP/GFR does not identify the responsible hormone.
Assay-Aware CKD-MBD Trend Dashboard
Small-multiple charts for total calcium, ionized calcium, phosphate, intact PTH (iPTH), alkaline phosphatase (ALP) and 25-hydroxyvitamin D. Lines break wherever the assay or unit changes; change is shown only against the prior comparable sample. PTH is plotted as a multiple of the assay’s upper limit of normal (ULN) when every PTH row has one.
| Collected | Analyte | Value | Unit | Assay / lab | Lower limit | Upper limit (ULN) |
|---|
Treatment events (drawn as markers; never used to compute anything)
⚕ PTH ratio = PTH ÷ assay ULN (no ratio when the ULN is missing or ≤ 0). The approximately 2–9 × ULN band (KDIGO 2017, 4.2.3, grade 2C) is drawn only for CKD G5D and does not imply appropriate bone turnover.
Elemental Calcium & Treatment-Burden Ledger
Sums documented prescribed oral elemental calcium: Σ (elemental mg per unit × units per dose × doses per day), and counts tablets per day. Diet and dialysate calcium are recorded separately and never added in.
| Product (verified label) | Category | Elemental Ca mg / unit | Units / dose | Doses / day | Adherence |
|---|
Label shows only the salt mass?
Recorded separately
Mineral Unit Converter
Same-analyte conversions only. Total and ionized calcium are different measurements and are never converted into each other.
⚕ Constants: phosphate 1 mg/dL = 0.3229 mmol/L; total calcium 1 mg/dL = 0.2495 mmol/L; ionized calcium 1 mmol/L = 4.008 mg/dL; creatinine 1 mg/dL = 88.4 µmol/L; PTH 1 pmol/L = 9.43 pg/mL; 25-hydroxyvitamin D 1 ng/mL = 2.496 nmol/L; magnesium 1 mg/dL = 0.4114 mmol/L. Rounded for display only.
IV Iron & Hypophosphatemia Review Aid
Captures formulation, exposure, phosphate results, symptoms and competing causes, then shows a formulation-specific evidence card and review prompts. There is no risk score and no replacement regimen.
Antiresorptive Mineral-Safety Planner
Documents the mineral assessment and calcium-monitoring plan before an antiresorptive in CKD. It never returns “eligible,” selects a drug or sets a dose.
Formulae, Validation & Evidence
Formulae
| Quantity | Equation | Source |
|---|---|---|
| FEPO₄ | 100 × (UP × SCr) ÷ (SP × UCr), each pair normalized to one unit | Payne, 1998 |
| TRP | 1 − FEPO₄/100; rejected if outside 0–1 | Payne, 1998 |
| TmP/GFR | TRP ≤ 0.86: TRP × SP · TRP > 0.86: SP × 0.3 × TRP ÷ (1 − 0.8 × TRP) | Kenny–Glen algorithm; Barth et al., 2000 |
| PTH ratio | PTH ÷ assay ULN; band ~2–9 × ULN for G5D only | KDIGO 2017 (4.2.3, 2C); Souberbielle et al., 2006 |
| Elemental calcium | Σ elemental mg/unit × units/dose × doses/day; carbonate 40.0%, anhydrous acetate 25.3% by molar mass | Chemistry; verify against label |
Validation status
| Module | Arithmetic | Interpretation |
|---|---|---|
| Phosphate handling | Golden fixtures pass to 1e-6 (FE 10% / TRP 0.90 / TmP 1.92857; FE 20% / TRP 0.80 / TmP 1.60); boundary TRP 0.86 uses the ≤ branch; SI and mixed-unit equivalence; invalid-input paths | Draft v0.1.0 — adult Barth ranges only; pending nephrologist sign-off |
| Trend dashboard | PTH 540 ÷ 65 = 8.3077; 540 ÷ 88 = 6.1364; no ratio for missing/zero ULN; break and no delta across assays | G5D band only; no turnover inference |
| Calcium ledger | 200 × 2 × 3 = 1,200 mg/day; duplicate and negative-value checks | None (documentation only) |
| IV iron, antiresorptive | No computation beyond unit conversion | Evidence cards; monitoring schedules not activated pending label verification |
Arithmetic fixtures are not clinical validation. 54 automated unit tests (MM-CORE v1.0.0) passed at publication.
