Drug Database · Clinicians

Trypan blue

Brands (1) AuroblueShow all

US brand (reference label): VISIONBLUE; not a Philippine-registered brand.

Supplementary drugs and other substances PH FDA category

Rx · Prescription drug1 PH product
Dispensing: Prescription (Rx) Last updated: Audience: Licensed health professionals
Label text on this page: US FDA-approved label via DailyMed/openFDA, set ID a44bc2ef-3d7f-4125-a7f7-c5969b1b4142, version date April 17, 2026 (VISIONBLUE · D.O.R.C. Dutch Ophthalmic Research Center (International) B.V.). Reproduced verbatim. Philippine-approved indications and doses may differ: check the PH package insert.

Use: Labeled indications

  • Indications & Usage VisionBlue® 0.06% is indicated for use as an aid in ophthalmic surgery by staining the anterior capsule of the lens.
US FDA label
Full indications and usage US FDA label

Indications & Usage VisionBlue® 0.06% is indicated for use as an aid in ophthalmic surgery by staining the anterior capsule of the lens. VisionBlue® 0.06% is a diagnostic dye indicated for use as an aid in ophthalmic surgery by staining the anterior capsule of the lens.

Contraindications

Contraindications VisionBlue® 0.06% is contraindicated when a non-hydrated (dry state), hydrophilic acrylic intraocular lens (IOL) is planned to be inserted into the eye. The dye may be absorbed by the IOL and stain it. Insertion of a non-hydrated (dry-state), hydrophilic acrylic intraocular lens (IOL).

US FDA label

Dosing: Adult

Dosage and administration (US label) US FDA label

Dosage & Administration Cataract surgery. VisionBlue® 0.06% is packaged in a single-patient-use syringe filled to a volume of 0.5 mL syringe to which a blunt cannula has to be attached. After opening the eye, an air bubble is injected into the anterior chamber of the eye in order to minimize dilution of VisionBlue® 0.06% by the aqueous.

VisionBlue® 0.06% is carefully applied onto the anterior lens capsule using a blunt cannula. Sufficient staining is achieved as soon as the dye has contacted the capsule. The anterior chamber is then irrigated with balanced salt solution to remove all excess dye. An anterior capsulotomy can then be performed. Inject an air bubble into the anterior chamber; Carefully apply VisionBlue® 0.06% onto the lens capsule; Remove all excess dye from the anterior chamber.

Dosing: Altered kidney function

No kidney-specific text is available from the US label for this generic yet. Check the Philippine package insert in the products table.

Kidney-specific guidance from renalcarematters.com: in preparation.

Dosing: Pediatric

Pediatric use (US label) US FDA label

Pediatric use The safety and effectiveness of trypan blue have been established in pediatric patients. Use of trypan blue is supported by evidence from an adequate and well-controlled study in pediatric patients.

Dosing: Older adult

Geriatric use (US label) US FDA label

Geriatric use No overall differences in safety and effectiveness have been observed between elderly and younger patients.

Dosage forms

Philippines

  • Sterile ophthalmic dye solution: 600 mcg/mL

Registered products in the Philippines

1 product registered with the Food and Drug Administration (FDA) Philippines list Trypan blue as the generic name. Registration status changes; confirm a product's current status on the FDA portal before relying on it.

Verify on PH FDA portal

Philippine FDA-registered products for Trypan blue
Package insert
AuroblueTrypan Blue
600 mcg/mL (0.06% w/v) Sterile Ophthalmic Dye SolutionIn individual pouch of USP Type I flint glass container x 1 mL (Box of 5's)
Rx
AurolabIndia
Brady Pharma Inc.
DR-XY34203
Jan 31, 2028

Source: FDA Philippines product registration database. "Valid until" is the registration validity date listed by the FDA; a past date may mean a renewal is pending. Package insert links point to files published by the FDA.

United States (label)

Dosage forms and strengths (US label) US FDA label

Dosage forms & Strengths VisionBlue® (trypan blue ophtalmic solution) 0.06% is a clear, dark blue ophtalmic solution supplied in 2.25 mL single-patient-use syringe filled to a volume of 0.5 mL. VisionBlue® (trypan blue ophthalmic solution) 0.06% in a single-patient-use syringe.

Warnings/Precautions

Warnings and precautions (US label) US FDA label

Warnings and Precautions Excessive staining: It is recommended that after injection all excess VisionBlue® 0.06% is immediately removed from the eye by thorough irrigation of the anterior chamber. Excessive staining: Excess VisionBlue® 0.06% should be removed from the eye immediately after staining.

Drug interactions

Metabolism and transporters (CYP, P-gp, OATP; US label) US FDA label

The dye does not penetrate the capsule, permitting visualization of the anterior capsule in contrast to the non-stained lens cortex and inner lens material.

Adverse reactions

Adverse reactions (US label) US FDA label

Adverse Reactions Adverse reactions reported following use of VisionBlue® 0.06% include discoloration of high water content hydrogen intraocular lenses (see Contraindications) and inadvertent staining of the posterior lens capsule and vitreous face. Staining of the posterior lens capsule or staining of the vitreous face is generally self limited, lasting up to one week. Inadvertent staining of the posterior lens capsule and vitreous face. To report SUSPECTED ADVERSE REACTIONS contact, Dutch Ophtalmic, USA at 1-800-75-DUTCH or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch

Pregnancy considerations

Pregnancy (US label) US FDA label

Pregnancy Risk Summary There are no available data on the use of VisionBlue® 0.06% in pregnant women to inform a drug-associated risk of major birth defects, miscarriage, or adverse maternal or fetal outcomes. Systemic absorption of VisionBlue® 0.06% in humans is expected to be negligible following injection and subsequent removal of the drug at the completion of surgical procedures.

Adequate animal reproduction studies were not conducted with VisionBlue® 0.06%, however, trypan blue has been shown to be teratogenic in various animal models at doses 800-fold and greater than the maximum recommended human dose, based on body surface area (BSA). Due to the negligible human systemic exposure when used as recommended, it is not expected that maternal use of VisionBlue® 0.06% will result in fetal exposure to the drug and risk of teratogenic effects.

Animal Data Trypan blue is teratogenic in rats, mice, rabbits, hamsters, dogs, guinea pigs, pigs, and chickens. The majority of teratogenicity studies performed involve intravenous, intraperitoneal, or subcutaneous administration in the rat. The teratogenic dose is 50 mg/kg as a single dose or 25 mg/kg/day during embryogenesis in the rat.

Normalized to BSA, these doses are approximately 1,600- and 800-fold the maximum recommended human dose of 0.3 mg per injection (based on a 60 kg person), assuming complete systemic absorption of trypan blue. Characteristic anomalies included neural tube, cardiovascular, vertebral, tail, and eye defects. Trypan blue also caused an increase in post-implantation mortality and decreased fetal weight.

In the monkey, trypan blue caused abortions with single or two daily doses of 50 mg/kg between 20th to 25th days of pregnancy, but no apparent increase in birth defects (approximately 3,200-fold the maximum recommended human dose based on BSA, assuming total absorption).

Mechanism of action

Mechanism of action VisionBlue® 0.06% selectively stains connective tissue structures in the human eye such as the anterior lens capsule of the human crystalline lens. VisionBlue® 0.06% is intended to be applied directly on the anterior lens capsule, staining any portion of the capsule which comes in contact with the dye. Excess dye is washed out of the anterior chamber. The dye does not penetrate the capsule, permitting visualization of the anterior capsule in contrast to the non-stained lens cortex and inner lens material.

US FDA label

Pharmacokinetics

Pharmacokinetics (US label) US FDA label

Clinical Pharmacology Mechanism of action VisionBlue® 0.06% selectively stains connective tissue structures in the human eye such as the anterior lens capsule of the human crystalline lens. VisionBlue® 0.06% is intended to be applied directly on the anterior lens capsule, staining any portion of the capsule which comes in contact with the dye. Excess dye is washed out of the anterior chamber. The dye does not penetrate the capsule, permitting visualization of the anterior capsule in contrast to the non-stained lens cortex and inner lens material.

Formulary and pricing (Philippines)

Check availability

Prices and stock vary by branch; renalcarematters.com does not sell medicines or receive payment from pharmacies.

References

  1. U.S. Food and Drug Administration. VISIONBLUE · D.O.R.C. Dutch Ophthalmic Research Center (International) B.V. [US FDA-approved label, version 23, April 17, 2026]. Via DailyMed/openFDA. https://dailymed.nlm.nih.gov/dailymed/drugInfo.cfm?setid=a44bc2ef-3d7f-4125-a7f7-c5969b1b4142
  2. Food and Drug Administration Philippines. Verification portal (product registrations). https://verification.fda.gov.ph

This page shows official label and registry text only; no renalcarematters.com clinical summary has been approved for it yet.

For health professionals. This page is a reference compiled from public regulatory sources for licensed health professionals in the Philippines. Verify every product detail against the current Philippine package insert and the FDA Philippines registration record. Information here is not a substitute for clinical judgment and does not replace the prescribing information approved for the specific product you dispense or prescribe.

Last updated: .