Drug Database · Clinicians

Busulfan

Also known as: busulphan (former British name)

Brands (1) BufacordShow all

Alkylating Drug (Alkylating Activity) US FDA class
Antineoplastic (alkylating agent) PH FDA category

Rx · Prescription drug1 PH productVAT-exempt
Dispensing: Prescription (Rx) Last updated: Audience: Licensed health professionals
Label text on this page: US FDA-approved label via DailyMed/openFDA, set ID 06883ac0-4b2a-4f26-89bf-512d37b9ba7f, version date June 27, 2024 (Busulfan · Eugia US LLC). Reproduced verbatim. Philippine-approved indications and doses may differ: check the PH package insert.

Use: Labeled indications

  • Busulfan injection is indicated for use in combination with cyclophosphamide as a conditioning regimen prior to allogeneic hematopoietic progenitor cell transplantation for chronic myelogenous leukemia.
US FDA label
Full indications and usage US FDA label

1 INDICATIONS AND USAGE Busulfan injection is indicated for use in combination with cyclophosphamide as a conditioning regimen prior to allogeneic hematopoietic progenitor cell transplantation for chronic myelogenous leukemia. Busulfan injection is an alkylating drug indicated for: Use in combination with cyclophosphamide as a conditioning regimen prior to allogeneic hematopoietic progenitor cell transplantation for chronic myelogenous leukemia (CML) (1)

Contraindications

4 CONTRAINDICATIONS Busulfan is contraindicated in patients with a history of hypersensitivity to any of its components. Busulfan is contraindicated in patients with a history of hypersensitivity to any of its components (4)

US FDA label

Dosing: Adult

Dosage and administration (US label) US FDA label
  • Pre-medicate with anticonvulsants (e.g. benzodiazepines, phenytoin, valproic acid or levetiracetam) and antiemetic (2.1, 5.2)
  • Dilute and administer as intravenous infusion. Do not administer as intravenous push or bolus (2.1, 2.3)
  • Recommended adult dose: 0.8 mg per kg of ideal body weight or actual body weight, whichever is lower, administered intravenously via a central venous catheter as a two-hour infusion every six hours for four consecutive days for a total of 16 doses (2.1)
2.1 Initial Dosing Information

2.1 Initial Dosing Information

  • Administer busulfan injection in combination with cyclophosphamide as a conditioning regimen prior to bone marrow or peripheral blood progenitor cell replacement. For patients weighing more than 12 kg, the recommended doses are: o Busulfan injection 0.8 mg per kg (ideal body weight or actual body weight, whichever is lower) intravenously via a central venous catheter as a two-hour infusion every six hours for four consecutive days for a total of 16 doses (Days -7, -6, -5 and -4). o Cyclophosphamide 60 mg per kg intravenously as a one-hour infusion on each of two days beginning no sooner than six hours following the 16 th dose of busulfan injection (Days -3 and -2). o Administer hematopoietic progenitor cells on Day 0.
  • Premedicate patients with anticonvulsants (e.g., benzodiazepines, phenytoin, valproic acid or levetiracetam) to prevent seizures reported with the use of high dose busulfan injection. Administer anticonvulsants 12 hours prior to busulfan injection to 24 hours after the last dose of busulfan injection [see Warnings and Precautions (5.2)].
  • Administer antiemetics prior to the first dose of busulfan injection and continue on a fixed schedule through busulfan injection administration.
  • Busulfan injection clearance is best predicted when the busulfan injection dose is administered based on adjusted ideal body weight. Dosing busulfan injection based on actual body weight, ideal body weight or other factors can produce significant differences in busulfan injection clearance among lean, normal and obese patients. o Calculate ideal body weight (IBW) as follows (height in cm and weight in kg): Men: IBW (kg) = 50+0.91x (height in cm -152) Women: IBW (kg) = 45+0.91x (height in cm -152) o For obese or severely obese patients, base busulfan injection dosing on adjusted ideal body weight (AIBW): AIBW= IBW + 0.25x (actual weight -IBW).
2.2 Preparation and Administration Precautions

2.2 Preparation and Administration Precautions Busulfan injection is incompatible with polycarbonate. Do not use any infusion components (syringes, filter needles, intravenous tubing, etc.) containing polycarbonate with busulfan injection. Use an administration set with minimal residual hold-up volume (2 mL to 5 mL) for product administration.

Busulfan injection is a cytotoxic drug. Follow applicable special handling and disposal procedures. Skin reactions may occur with accidental exposure. Use gloves when preparing busulfan injection. If busulfan injection or diluted busulfan injection solution contacts the skin or mucosa, wash the skin or mucosa thoroughly with water.

Visually inspect parenteral drug products for particulate matter and discoloration prior to administration whenever the solution and container permit. Do not use if particulate matter is seen in the busulfan injection vial.

2.3 Preparation for Intravenous Administration

2.3 Preparation for Intravenous Administration Busulfan injection must be diluted prior to intravenous infusion with either 0.9% Sodium Chloride Injection, USP (normal saline) or 5% Dextrose Injection, USP (D5W). The diluent quantity should be 10 times the volume of busulfan injection, so that the final concentration of busulfan is approximately 0.5 mg per mL.

Calculation of the dose for a 70 kg patient would be performed as follows: (70 kg patient) x (0.8 mg per kg) ÷ (6 mg per mL) = 9.3 mL busulfan injection (56 mg total dose). To prepare the final solution for infusion, add 9.3 mL of busulfan injection to 93 mL of diluent (normal saline or D5W) as calculated below: (9.3 mL busulfan injection) x (10) = 93 mL of either diluent plus the 9.3 mL of busulfan injection to yield a final concentration of busulfan of 0.54 mg per mL (9.3 mL x 6 mg per mL ÷ 102.3 mL =0.54 mg per mL).

All transfer procedures require strict adherence to aseptic techniques, preferably employing a vertical laminar flow safety hood while wearing gloves and protective clothing. Always add the busulfan injection to the diluent, not the diluent to the busulfan injection. Mix thoroughly by inverting several times. Discard unused portion.

Infusion pumps should be used to administer the diluted busulfan injection solution. Set the flow rate of the pump to deliver the entire prescribed busulfan injection dose over two hours. Prior to and following each infusion, flush the indwelling catheter line with approximately 5 mL of 0.9% Sodium Chloride Injection, USP or 5% Dextrose Injection, USP.

DO NOT infuse concomitantly with another intravenous solution of unknown compatibility. WARNING: RAPID INFUSION OF BUSULFAN INJECTION HAS NOT BEEN TESTED AND IS NOT RECOMMENDED.

Dosing: Altered kidney function

No kidney-specific text is available from the US label for this generic yet. Check the Philippine package insert in the products table.

Kidney-specific guidance from renalcarematters.com: in preparation.

Dosing: Pediatric

Pediatric use (US label) US FDA label

8.4 Pediatric Use The effectiveness of busulfan in the treatment of CML has not been specifically studied in pediatric patients. An open-label, uncontrolled study evaluated the pharmacokinetics of busulfan in 24 pediatric patients receiving busulfan as part of a conditioning regimen administered prior to hematopoietic progenitor cell transplantation for a variety of malignant hematologic (N=15) or non-malignant diseases (N=9).

Patients ranged in age from 5 months to 16 years (median 3 years). Busulfan dosing was targeted to achieve an area under the plasma concentration curve (AUC) of 900 to 1350 µM•min with an initial dose of 0.8 mg per kg or 1.0 mg per kg (based on Actual Body Weight (ABW)) if the patient was greater than 4 or less than or equal to 4 years, respectively.

The dose was adjusted based on plasma concentration after completion of dose 1. Patients received busulfan doses every six hours as a two-hour infusion over four days for a total of 16 doses, followed by cyclophosphamide 50 mg per kg once daily for four days. After one rest day, hematopoietic progenitor cells were infused.

All patients received phenytoin as seizure prophylaxis. The target AUC (900 to 1350±5% µM•min) for busulfan was achieved at dose 1 in 71% (17/24) of patients. Steady state pharmacokinetic testing was performed at dose 9 and 13. Busulfan levels were within the target range for 21 of 23 evaluable patients. All 24 patients experienced neutropenia (absolute neutrophil count (ANC) less than 0.5x10 9 /L) and thrombocytopenia (platelet transfusions or platelet count less than 20,000/mm 3).

Seventy-nine percent (19/24) of patients experienced lymphopenia (absolute lymphocyte count less than 0.1x10 9). In 23 patients, the ANC recovered to greater than 0.5x10 9 /L (median time to recovery = BMT day +13; range = BMT day +9 to +22). One patient who died on day +20 had not recovered to an ANC >0.5x10 9 /L. Four (17%) patients died during the study.

Two patients died within 28 days of transplant; one with pneumonia and capillary leak syndrome, and the other with pneumonia and veno-occlusive disease. Two patients died prior to day 100; one due to progressive disease and one due to multi-organ failure. Adverse reactions were reported in all 24 patients during the study period (BMT day -10 through BMT day +28) or post- study surveillance period (day +29 through +100).

These included vomiting (100%), nausea (83%), stomatitis (79%), HVOD (21%), graft-versus host disease (GVHD) (25%), and pneumonia (21%). Based on the results of this 24-patient clinical trial, a suggested dosing regimen of busulfan in pediatric patients is shown in the following dosing nomogram: Busulfan Dosing Nomogram Patient’s Actual Body Weight (ABW) Busulfan Dosage less than or equal to 12 kgs 1.1 (mg per kg) greater than 12 kgs 0.8 (mg per kg) Simulations based on a pediatric population pharmacokinetic model indicate that approximately 60% of pediatric patients will achieve a target busulfan exposure (AUC) between 900 to 1350 µM•min with the first dose of busulfan using this dosing nomogram.

Therapeutic drug monitoring and dose adjustment following the first dose of busulfan is recommended. Dose Adjustment Based on Therapeutic Drug Monitoring Instructions for measuring the AUC of busulfan at dose 1 (see Blood Sample Collection for AUC Determination) and the formula for adjustment of subsequent doses to achieve the desired target AUC (1125 μM•min), are provided below.

Adjusted dose (mg) = Actual Dose (mg) x Target AUC (µM•min)/Actual AUC (µM•min) For example, if a patient received a dose of 11 mg busulfan and if the corresponding AUC measured was 800 μM•min, for a target AUC of 1125 µM•min, the target mg dose would be: Mg dose =11 mg x 1,125 µM•min /800 µM•min =15.5 mg Busulfan dose adjustment may be made using this formula and instructions below. Blood Sample Collection for AUC Determination Calculate the AUC (µM•min) based on blood samples collected at the following time points: For dose 1:2 hr (end of infusion), 4 hr and 6 hr (immediately prior to the next scheduled busulfan administration).

Actual sampling times should be recorded. For doses other than dose 1: Pre-infusion (baseline), 2 hr (end of infusion), 4 hr and 6 hr (immediately prior to the next scheduled busulfan administration). AUC calculations based on fewer than the three specified samples may result in inaccurate AUC determinations. For each scheduled blood sample, collect one to three mL of blood into heparinized (Na or Li heparin) Vacutainer ® tubes.

The blood samples should be placed on wet ice immediately after collection and should be centrifuged (at 4°C) within one hour. The plasma, harvested into appropriate cryovial storage tubes, is to be frozen immediately at -20°C. All plasma samples are to be sent in a frozen state (i.e., on dry ice) to the assay laboratory for the determination of plasma busulfan concentrations.

Calculation of AUC Busulfan AUC calculations may be made using the following instructions and appropriate standard pharmacokinetic formula: Dose 1 AUC infinity Calculation: AUC infinity = AUC 0-6 hr +AUC extrapolated, where AUC 0-6hr is to be estimated using the linear trapezoidal rule and AUC extrapolated can be computed by taking the ratio of the busulfan concentration at Hour 6 and the terminal elimination rate constant, λ z .The λ z must be calculated from the terminal elimination phase of the busulfan concentration vs. time curve. A “0” pre-dose busulfan concentration should be assumed, and used in the calculation of AUC.

If the AUC is assessed subsequent to Dose 1, steady-state AUC ss (AUC 0-6hr) is to be estimated from the trough, 2 hr, 4 hr and 6 hr concentrations using the linear trapezoidal rule. Instructions for Drug Administration and Blood Sample Collection for Therapeutic Drug Monitoring Use an administration set with minimal residual hold up (priming) volume (1 to 3 mL) for drug infusion to ensure accurate delivery of the entire prescribed dose and to ensure accurate collection of blood samples for therapeutic drug monitoring and dose adjustment.

Prime the administration set tubing with drug solution to allow accurate documentation of the start time of busulfan infusion. Collect the blood sample from a peripheral IV line to avoid contamination with infusing drug. If the blood sample is taken directly from the existing central venous catheter (CVC), DO NOT COLLECT THE BLOOD SAMPLE WHILE THE DRUG IS INFUSING to ensure that the end of infusion sample is not contaminated with any residual drug.

At the end of infusion (2 hr), disconnect the administration tubing and flush the CVC line with 5 mL of normal saline prior to the collection of the end of infusion sample from the CVC port. Collect the blood samples from a different port than that used for the busulfan infusion. When recording the busulfan infusion stop time, do not include the time required to flush the indwelling catheter line.

Discard the administration tubing at the end of the two-hour infusion [see Dosage and Administration (2.3)].

Dosing: Older adult

Geriatric use (US label) US FDA label

8.5 Geriatric Use Clinical studies of busulfan did not include sufficient numbers of subjects aged 65 and over to determine whether they respond differently from younger subjects.

Administration

2.2 Preparation and Administration Precautions Busulfan injection is incompatible with polycarbonate. Do not use any infusion components (syringes, filter needles, intravenous tubing, etc.) containing polycarbonate with busulfan injection. Use an administration set with minimal residual hold-up volume (2 mL to 5 mL) for product administration. Busulfan injection is a cytotoxic drug. Follow applicable special handling and disposal procedures. Skin reactions may occur with accidental exposure. Use gloves when preparing busulfan injection. If busulfan injection or diluted busulfan injection solution contacts the skin or mucosa, wash the skin or mucosa thoroughly with water. Visually inspect parenteral drug products for particulate matter and discoloration prior to administration whenever the solution and container permit. Do not use if particulate matter is seen in the busulfan injection vial.

2.3 Preparation for Intravenous Administration Busulfan injection must be diluted prior to intravenous infusion with either 0.9% Sodium Chloride Injection, USP (normal saline) or 5% Dextrose Injection, USP (D5W). The diluent quantity should be 10 times the volume of busulfan injection, so that the final concentration of busulfan is approximately 0.5 mg per mL. Calculation of the dose for a 70 kg patient would be performed as follows: (70 kg patient) x (0.8 mg per kg) ÷ (6 mg per mL) = 9.3 mL busulfan injection (56 mg total dose). To prepare the final solution for infusion, add 9.3 mL of busulfan injection to 93 mL of diluent (normal saline or D5W) as calculated below: (9.3 mL busulfan injection) x (10) = 93 mL of either diluent plus the 9.3 mL of busulfan injection to yield a final concentration of busulfan of 0.54 mg per mL (9.3 mL x 6 mg per mL ÷ 102.3 mL =0.54 mg per mL). All transfer procedures require strict adherence to aseptic techniques, preferably employing a vertical laminar flow safety hood while wearing gloves and protective clothing. Always add the busulfan injection to the diluent, not the diluent to the busulfan injection. Mix thoroughly by inverting several times. Discard unused portion. Infusion pumps should be used to administer the diluted busulfan injection solution. Set the flow rate of the pump to deliver the entire prescribed busulfan injection dose over two hours. Prior to and following each infusion, flush the indwelling catheter line with approximately 5 mL of 0.9% Sodium Chloride Injection, USP or 5% Dextrose Injection, USP. DO NOT infuse concomitantly with another intravenous solution of unknown compatibility. WARNING: RAPID INFUSION OF BUSULFAN INJECTION HAS NOT BEEN TESTED AND IS NOT RECOMMENDED.

US FDA label

Dosage forms

Philippines

  • Concentrate solution for intravenous infusion: 60 mg/10 mL

Registered products in the Philippines

1 product registered with the Food and Drug Administration (FDA) Philippines list Busulfan as the generic name. Registration status changes; confirm a product's current status on the FDA portal before relying on it.

Verify on PH FDA portal

Philippine FDA-registered products for Busulfan
Package insert
BufacordBusulfan
60 mg/10 mL Concentrate Solution for Intravenous InfusionUSP Type I Clear vial x 10mL with grey rubber stopper and purple aluminum flip-off seal (Box of 1's)
RxVAT-exempt
Intas Pharmaceuticals LimitedIndia
Accord Healthcare Limited - Philippine Barnch OfficeImporter: Accord Healthcare Limited-Philippine Branch Office
DRP-12310
Jul 21, 2027

Source: FDA Philippines product registration database. "Valid until" is the registration validity date listed by the FDA; a past date may mean a renewal is pending. Package insert links point to files published by the FDA.

United States (label)

Dosage forms and strengths (US label) US FDA label

3 DOSAGE FORMS AND STRENGTHS Injection: 60 mg/10 mL (6 mg/mL) as a clear, colorless, sterile, solution in a single-dose vial for intravenous use only. Injection: 60 mg/10 mL (6 mg/mL) single-dose vial (3)

Warnings/Precautions

The boxed warning is shown at the top of this page.

Warnings and precautions (US label) US FDA label
  • Seizures: Initiate anticonvulsant prophylactic therapy prior to treatment with busulfan. Monitor patients with history of seizure disorder, head trauma or receiving epileptogenic drugs (5.2)
  • Hepatic Veno-Occlusive Disease (HVOD): Increased risk of developing HVOD at AUC greater than 1,500 µM·min. Monitor serum transaminases, alkaline phosphatase and bilirubin daily (5.3)
  • Embryo-fetal Toxicity: Can cause fetal harm. Advise of potential risk to a fetus and use of effective contraception (5.4, 8.1, 8.3)
  • Cardiac tamponade has been reported in pediatric patients with thalassemia who received high doses of oral busulfan and cyclophosphamide. Abdominal pain and vomiting preceded the tamponade in most patients (5.5)
5.1 Myelosuppression

5.1 Myelosuppression The most frequent serious consequence of treatment with busulfan at the recommended dose and schedule is prolonged myelosuppression, occurring in all patients (100%). Severe granulocytopenia, thrombocytopenia, anemia, or any combination thereof may develop. Hematopoietic progenitor cell transplantation is required to prevent potentially fatal complications of the prolonged myelosuppression.

Monitor complete blood counts, including white blood cell differentials, and quantitative platelet counts daily during treatment and until engraftment is demonstrated. Absolute neutrophil counts dropped below 0.5x10 9 /L at a median of 4 days post-transplant in 100% of patients treated in the busulfan clinical trial. The absolute neutrophil count recovered at a median of 13 days following allogeneic transplantation when prophylactic filgrastim was used in the majority of patients.

Thrombocytopenia (less than 25,000/mm 3 or requiring platelet transfusion) occurred at a median of 5 to 6 days in 98% of patients. Anemia (hemoglobin less than 8.0 g/dL) occurred in 69% of patients. Use antibiotic therapy and platelet and red blood cell support when medically indicated.

5.2 Seizures

5.2 Seizures Seizures have been reported in patients receiving high-dose oral busulfan at doses producing plasma drug levels similar to those achieved following the recommended dosage of busulfan. Despite prophylactic therapy with phenytoin, one seizure (1/42 patients) was reported during an autologous transplantation clinical trial of busulfan.

This episode occurred during the cyclophosphamide portion of the conditioning regimen, 36 hours after the last busulfan dose. Initiate phenytoin therapy or any other alternative anti-convulsant prophylactic therapy (e.g., benzodiazepines, valproic acid or levetiracetam) prior to busulfan treatment [see Dosage and Administration (2.1)].

Use caution when administering the recommended dose of busulfan to patients with a history of a seizure disorder or head trauma or who are receiving other potentially epileptogenic drugs.

5.3 Hepatic Veno-Occlusive Disease (HVOD)

5.3 Hepatic Veno-Occlusive Disease (HVOD) Current literature suggests that high busulfan area under the plasma concentration verses time curve (AUC) values (greater than 1,500 µM•min) may be associated with an increased risk of developing HVOD. Patients who have received prior radiation therapy, greater than or equal to three cycles of chemotherapy, or a prior progenitor cell transplant may be at an increased risk of developing HVOD with the recommended busulfan dose and regimen.

Based on clinical examination and laboratory findings, HVOD was diagnosed in 8% (5/61) of patients treated with busulfan in the setting of allogeneic transplantation, was fatal in 2/5 cases (40%), and yielded an overall mortality from HVOD in the entire study population of 2/61 (3%). Three of the five patients diagnosed with HVOD were retrospectively found to meet the Jones’ criteria.

The incidence of HVOD reported in the literature from the randomized, controlled trials was 7.7% to 12% [see Clinical Studies (14)]. Monitor serum transaminases, alkaline phosphatase, and bilirubin daily through BMT Day +28 to detect hepatotoxicity, which may herald the onset of HVOD.

5.4 Embryo-fetal Toxicity

5.4 Embryo-fetal Toxicity Busulfan can cause fetal harm when administered to a pregnant woman based on animal data. Busulfan was teratogenic in mice, rats, and rabbits. The solvent, DMA, may also cause fetal harm when administered to a pregnant woman based on findings in animals. Advise pregnant women of the potential risk to a fetus.

Advise females and males of reproductive potential to use effective contraception during and after treatment with busulfan [see Use in Specific Populations (8.1, 8.3)].

5.5 Cardiac Tamponade

5.5 Cardiac Tamponade Cardiac tamponade has been reported in pediatric patients with thalassemia (8/400 or 2% in one series) who received high doses of oral busulfan and cyclophosphamide as the preparatory regimen for hematopoietic progenitor cell transplantation. Six of the eight children died and two were saved by rapid pericardiocentesis.

Abdominal pain and vomiting preceded the tamponade in most patients. Monitor for signs and symptoms, promptly evaluate and treat if cardiac tamponade is suspected.

5.6 Bronchopulmonary Dysplasia

5.6 Bronchopulmonary Dysplasia Bronchopulmonary dysplasia with pulmonary fibrosis is a rare but serious complication following chronic busulfan therapy. The average onset of symptoms is 4 years after therapy (range 4 months to 10 years).

5.7 Cellular Dysplasia

5.7 Cellular Dysplasia Busulfan may cause cellular dysplasia in many organs. Cytologic abnormalities characterized by giant, hyperchromatic nuclei have been reported in lymph nodes, pancreas, thyroid, adrenal glands, liver, lungs and bone marrow. This cytologic dysplasia may be severe enough to cause difficulty in the interpretation of exfoliative cytologic examinations of the lungs, bladder, breast and the uterine cervix.

Drug interactions

Drug interactions (US label) US FDA label
  • Drugs that Decrease Busulfan Clearance: Metronidazole, itraconazole, iron chelating agents, acetaminophen. (7.1)
  • Drugs that Increase Busulfan Clearance: Phenytoin. (7.2)
7.1 Drugs

7.1 Drugs that Decrease Busulfan Clearance Itraconazole decreases busulfan clearance by up to 25%. Metronidazole decreases the clearance of busulfan to a greater extent than does itraconazole; metronidazole coadministration has been associated with increased busulfan toxicity. Fluconazole (200 mg) has been used with busulfan.

Decreased clearance of busulfan was observed with concomitant use with deferasirox. The mechanism of this interaction is not fully elucidated. Discontinue iron chelating agents well in advance of administration of busulfan to avoid increased exposure to busulfan. Because busulfan is eliminated from the body via conjugation with glutathione, use of acetaminophen prior to (less than 72 hours) or concurrent with busulfan may result in reduced busulfan clearance based upon the known property of acetaminophen to decrease glutathione levels in the blood and tissues.

7.2 Drugs

7.2 Drugs that Increase Busulfan Clearance Phenytoin increases the clearance of busulfan by 15% or more, possibly due to the induction of glutathione-S-transferase. Since the pharmacokinetics of busulfan were studied in patients treated with phenytoin, the clearance of busulfan at the recommended dose may be lower and exposure (AUC) higher in patients not treated with phenytoin.

Adverse reactions

Adverse reactions (US label) US FDA label
  • The following adverse reactions are discussed in more detail in other sections of the labeling: Myelosuppression [see Warnings and Precautions (5.1)] Seizures [see Warnings and Precautions (5.2)] Hepatic Veno-Occlusive Disease (HVOD) [see Warnings and Precautions (5.3)] Embryo-fetal Toxicity [see Warnings and Precautions (5.4)] Cardiac Tamponade [see Warnings and Precautions (5.5)] Bronchopulmonary Dysplasia [see Warnings and Precautions (5.6)] Cellular Dysplasia [see Warnings and Precautions (5.7)] Most common adverse reactions (incidence >60%) were: myelosuppression, nausea, stomatitis, vomiting, anorexia, diarrhea, insomnia, fever, hypomagnesemia, abdominal pain, anxiety, headache, hyperglycemia and hypokalemia (6.1)
  • To report SUSPECTED ADVERSE REACTIONS, contact Eugia US LLC at 1-866-850-2876 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch.
6.1 Clinical Trials Experience

6.1 Clinical Trials Experience Because clinical trials are conducted under widely varying conditions, adverse reaction rates observed in the clinical trials of a drug cannot be directly compared to rates in the clinical trials of another drug and may not reflect the rates observed in practice. Adverse reaction information is primarily derived from the clinical study (N=61) of busulfan and the data obtained for high-dose oral busulfan conditioning in the setting of randomized, controlled trials identified through a literature review.

In the busulfan injection allogeneic stem cell transplantation clinical trial, all patients were treated with busulfan 0.8 mg per kg as a two-hour infusion every six hours for 16 doses over four days, combined with cyclophosphamide 60 mg per kg x2 days. Ninety-three percent (93%) of evaluable patients receiving this dose of busulfan maintained an AUC less than 1,500 µM•min for dose 9, which has generally been considered the level that minimizes the risk of HVOD.

Table 1 lists the non-hematologic adverse reactions events through Bone Marrow Transplantation (BMT) Day +28 at a rate greater than or equal to 20% in patients treated with busulfan prior to allogeneic hematopoietic cell transplantation. Table 1: Summary of the Incidence (greater than or equal to 20%) of Non-Hematologic Adverse Reactions through BMT Day +28 in Patients who Received Busulfan Prior to Allogeneic Hematopoietic Progenitor Cell Transplantation 1.

Includes all reported adverse reactions regardless of severity (toxicity grades 1 to 4) Non-Hematological Adverse Reactions 1 Percent Incidence BODY AS A WHOLE Fever 80 Headache 69 Asthenia 51 Chills 46 Pain 44 Edema General 28 Allergic Reaction 26 Chest Pain 26 Inflammation at Injection Site 25 Back Pain 23 CARDIOVASCULAR SYSTEM Tachycardia 44 Hypertension 36 Thrombosis 33 Vasodilation 25 DIGESTIVE SYSTEM Nausea 98 Stomatitis (Mucositis) 97 Vomiting 95 Anorexia 85 Diarrhea 84 Abdominal Pain 72 Dyspepsia 44 Constipation 38 Dry Mouth 26 Rectal Disorder 25 Abdominal Enlargement 23 METABOLIC AND NUTRITIONAL SYSTEM Hypomagnesemia 77 Hyperglycemia 66 Hypokalemia 64 Hypocalcemia 49 Hyperbilirubinemia 49 Edema 36 SGPT Elevation 31 Creatinine Increased 21 NERVOUS SYSTEM Insomnia 84 Anxiety 72 Dizziness 30 Depression 23 RESPIRATORY SYSTEM Rhinitis 44 Lung Disorder 34 Cough 28 Epistaxis 25 Dyspnea 25 SKIN AND APPENDAGES Rash 57 Pruritus 28 Additional Adverse Reactions by Body System Hematologic: Prolonged prothrombin time Gastrointestinal: Esophagitis, ileus, hematemesis, pancreatitis, rectal discomfort Hepatic: Alkaline phosphatase increases, jaundice, hepatomegaly Graft-versus-host disease: Graft-versus-host disease. There were 3 deaths (5%) attributed to GVHD.

Edema: Hypervolemia, or documented weight increase Infection: Infection, pneumonia (fatal in one patient and life-threatening in 3% of patients) Cardiovascular: Arrhythmia, atrial fibrillation, ventricular extrasystoles, third degree heart block, thrombosis (all episodes were associated with the central venous catheter), hypotension, flushing and hot flashes, cardiomegaly, ECG abnormality, left-sided heart failure, and pericardial effusion Pulmonary: Hyperventilation, alveolar hemorrhage (fatal in 3%), pharyngitis, hiccup, asthma, atelectasis, pleural effusion, hypoxia, hemoptysis, sinusitis, and interstitial fibrosis (fatal in a single case) Neurologic: Cerebral hemorrhage, coma, delirium, agitation, encephalopathy, confusion, hallucinations, lethargy, somnolence Renal: BUN increased, dysuria, oliguria, hematuria, hemorrhagic cystitis Skin: Alopecia, vesicular rash, maculopapular rash, vesiculo-bullous rash, exfoliative dermatitis, erythema nodosum, acne, skin discoloration Metabolic: Hypophosphatemia, hyponatremia Other Events: Injection site pain, myalgia, arthralgia, ear disorder

6.2 Postmarketing Experience

6.2 Postmarketing Experience Because these reactions are reported voluntarily from a population of uncertain size, it is not always possible to reliably estimate their frequency or establish a causal relationship to drug exposure. The following adverse reactions have been identified during post-approval use of busulfan injection: Blood and Lymphatic System Disorders: febrile neutropenia Gastrointestinal Disorders: tooth hypoplasia Metabolism and Nutrition Disorders: tumor lysis syndrome Vascular Disorders: thrombotic microangiopathy (TMA) Infections and Infestations: severe bacterial, viral (e.g., cytomegalovirus viremia) and fungal infections; and sepsis.

6.3 Oral Busulfan Literature Review

6.3 Oral Busulfan Literature Review A literature review identified four randomized, controlled trials that evaluated a high-dose oral busulfan-containing conditioning regimen for allogeneic bone marrow transplantation in the setting of CML [see Clinical Studies (14)]. The safety outcomes reported in those trials are summarized in Table 2 below for a mixed population of hematological malignancies (AML, CML, and ALL).

Table 2: Summary of safety analyses from the randomized, controlled trials utilizing a high dose oral busulfan-containing conditioning regimen that were identified in a literature review. 1. TRM = Transplantation Related Mortality 2. VOD = Veno-Occlusive Disease of the liver 3. GVHD = Graft versus Host Disease Clift CML Chronic Phase TRM 1 VOD 2 GVHD 3 Pulmonary Hemorrhagic Cystitis Seizure Death ≤100d =4.1% (3/73) No Report Acute ≥ Grade 2 =35% Chronic = 41% (30/73) 1 death from Idiopathic Interstitial Pneumonitis And 1 death from Pulmonary Fibrosis No Report No Report Devergie CML Chronic Phase TRM VOD GVHD Pulmonary Hemorrhagic Cystitis Seizure 38% 7.7% (5/65) Deaths = 4.6% (3/65) Acute ≥ Grade 2 = 41% (24/59 at risk) Interstital Pneumonitis = 16.9% (11/65) 10.8% (7/65) No Report Ringden CML, AML, ALL TRM VOD GVHD Pulmonary Hemorrhagic Cystitis Seizure 28% 12% Acute ≥ Grade 2 GVHD = 26% Chronic GVHD =45% Interstitial Pneumonitis = 14% 24% 6% Blume CML, AML, ALL TRM VOD GVHD Pulmonary Hemorrhagic Cystitis Seizure No Report Deaths =4.9% Acute ≥ Grade 2 GVHD=22% (13/58 at risk) Chronic GVHD =31% (14/45 at risk) No Report No Report No Report

Adverse reaction frequency tables (US label) US FDA label
Table 1: Summary of the Incidence (greater than or equal to 20%) of Non-Hematologic Adverse Reactions through BMT Day +28 in Patients who Received Busulfan Prior to Allogeneic Hematopoietic Progenitor Cell Transplantation
1. Includes all reported adverse reactions regardless of severity (toxicity grades 1 to 4)
Non-Hematological Adverse Reactions1 Percent Incidence
BODY AS A WHOLE
Fever 80
Headache 69
Asthenia 51
Chills 46
Pain 44
Edema General 28
Allergic Reaction 26
Chest Pain 26
Inflammation at Injection Site 25
Back Pain 23
CARDIOVASCULAR SYSTEM
Tachycardia 44
Hypertension 36
Thrombosis 33
Vasodilation 25
DIGESTIVE SYSTEM
Nausea 98
Stomatitis (Mucositis) 97
Vomiting 95
Anorexia 85
Diarrhea 84
Abdominal Pain 72
Dyspepsia 44
Constipation 38
Dry Mouth 26
Rectal Disorder 25
Abdominal Enlargement 23
METABOLIC AND NUTRITIONAL SYSTEM
Hypomagnesemia 77
Hyperglycemia 66
Hypokalemia 64
Hypocalcemia 49
Hyperbilirubinemia 49
Edema 36
SGPT Elevation 31
Creatinine Increased 21
NERVOUS SYSTEM
Insomnia 84
Anxiety 72
Dizziness 30
Depression 23
RESPIRATORY SYSTEM
Rhinitis 44
Lung Disorder 34
Cough 28
Epistaxis 25
Dyspnea 25
SKIN AND APPENDAGES
Rash 57
Pruritus 28
Table 2: Summary of safety analyses from the randomized, controlled trials utilizing a high dose oral busulfan-containing conditioning regimen that were identified in a literature review.
1. TRM = Transplantation Related Mortality 2. VOD = Veno-Occlusive Disease of the liver 3. GVHD = Graft versus Host Disease
Clift CML Chronic Phase
TRM1 VOD2 GVHD3 Pulmonary Hemorrhagic Cystitis Seizure
Death ≤100d =4.1% (3/73) No Report Acute ≥ Grade 2 =35% Chronic = 41% (30/73) 1 death from Idiopathic Interstitial Pneumonitis And 1 death from Pulmonary Fibrosis No Report No Report
Devergie CML Chronic Phase
TRM VOD GVHD Pulmonary Hemorrhagic Cystitis Seizure
38% 7.7% (5/65) Deaths = 4.6% (3/65) Acute ≥ Grade 2 = 41% (24/59 at risk) Interstital Pneumonitis = 16.9% (11/65) 10.8% (7/65) No Report
Ringden CML, AML, ALL
TRM VOD GVHD Pulmonary Hemorrhagic Cystitis Seizure
28% 12% Acute ≥ Grade 2 GVHD = 26% Chronic GVHD =45% Interstitial Pneumonitis = 14% 24% 6%
Blume CML, AML, ALL
TRM VOD GVHD Pulmonary Hemorrhagic Cystitis Seizure
No Report Deaths =4.9% Acute ≥ Grade 2 GVHD=22% (13/58 at risk) Chronic GVHD =31% (14/45 at risk) No Report No Report No Report

Pregnancy considerations

Pregnancy (US label) US FDA label

8.1 Pregnancy Risk Summary Busulfan can cause fetal harm when administered to a pregnant woman based on animal data. Busulfan was teratogenic in mice, rats, and rabbits following administration during organogenesis. The solvent, DMA, may also cause fetal harm when administered to a pregnant woman. In rats, DMA doses of approximately 40% of the daily dose of DMA in the busulfan dose on a mg/m 2 basis given during organogenesis caused significant developmental anomalies (see Data).

There are no available human data informing the drug-associated risk. Advise pregnant women of the potential risk to a fetus. The background risk of major birth defects and miscarriage for the indicated populations are unknown. However, the background risk in the U.S. general population of major birth defects is 2 to 4% and of miscarriage is 15 to 20% of clinically recognized pregnancies.

Animal Data Following administration during organogenesis in animals, busulfan caused malformations and anomalies, including significant alterations in the musculoskeletal system, body weight gain, and size. In pregnant rats, busulfan produced sterility in both male and female offspring due to the absence of germinal cells in the testes and ovaries.

The solvent, N,N- dimethylacetamide (DMA), administered to rats at doses of 400 mg/kg/day (about 40% of the daily dose of DMA in the busulfan dose on a mg/m 2 basis) during organogenesis caused significant developmental anomalies. The most striking abnormalities included anasarca, cleft palate, vertebral anomalies, rib anomalies, and serious anomalies of the vessels of the heart.

Breastfeeding considerations

Lactation (US label) US FDA label

8.3 Females and Males of Reproductive Potential Contraception Females Busulfan can cause fetal harm when administered to a pregnant woman [see Use in Specific Populations (8.1)]. Advise females of reproductive potential to use effective contraception during treatment with busulfan and for 6 months following cessation of therapy.

Males Busulfan may damage spermatozoa and testicular tissue, resulting in possible genetic fetal abnormalities. Males with female sexual partners of reproductive potential should use effective contraception during treatment with busulfan and for 3 months after cessation of therapy [see Nonclinical Toxicology (13.1)]. Infertility Females Ovarian suppression and amenorrhea commonly occur in premenopausal women undergoing chronic, low-dose busulfan therapy for chronic myelogenous leukemia.

Busulfan may cause temporary or permanent infertility in prepubertal girls or in females of child-bearing potential treated with high-dose busulfan in the conditioning regimen prior to allogeneic hematopoietic progenitor cell transplantation. Males Sterility, azoospermia, and testicular atrophy have been reported in male patients.

Mechanism of action

12.1 Mechanism of Action Busulfan is a bifunctional alkylating agent in which two labile methanesulfonate groups are attached to opposite ends of a four-carbon alkyl chain. In aqueous media, busulfan hydrolyzes to release the methanesulfonate groups. This produces reactive carbonium ions that can alkylate DNA. DNA damage is thought to be responsible for much of the cytotoxicity of busulfan.

US FDA label

Pharmacokinetics

Half-life and elimination (verbatim, US label)

Excretion: Following administration of 14 C-labeled busulfan to humans, approximately 30% of the radioactivity was excreted into the urine over 48 hours; negligible amounts were recovered in feces.

Pharmacokinetics (US label) US FDA label

12.3 Pharmacokinetics The pharmacokinetics of busulfan were studied in 59 patients participating in a prospective trial of a busulfan-cyclophosphamide preparatory regimen prior to allogeneic hematopoietic progenitor stem cell transplantation. Patients received 0.8 mg/kg busulfan every six hours, for a total of 16 doses over four days.

Fifty-five of fifty-nine patients (93%) administered busulfan maintained AUC values below the target value (less than 1500 μM•min). Table 3: Steady State Pharmacokinetic Parameters Following Busulfan Infusion (0.8 mg per kg; N=59) 1. Clearance normalized to actual body weight for all patients. Mean CV (%) Range C max (ng per mL) 1222 18 496 to 1684 AUC (µM•min) 1167 20 556 to 1673 CL (mL per min per kg) 1 2.52 25 1.49 to 4.31 Busulfan pharmacokinetics showed consistency between dose 9 and dose 13 as demonstrated by reproducibility of steady state C max and a low coefficient of variation for this parameter.

Distribution: Busulfan achieves concentrations in the cerebrospinal fluid approximately equal to those in plasma. Busulfan primarily binds to albumin (Mean ± standard deviation = 32.4 ± 2.2%). Metabolism: Busulfan is predominantly metabolized by conjugation with glutathione, both spontaneously and by glutathione S-transferase (GST) catalysis.

This conjugate undergoes extensive oxidative metabolism in the liver. Excretion: Following administration of 14 C-labeled busulfan to humans, approximately 30% of the radioactivity was excreted into the urine over 48 hours; negligible amounts were recovered in feces. Specific Populations Pediatric Patients: In a pharmacokinetic study of busulfan in 24 pediatric patients, the population pharmacokinetic (PPK) estimates of busulfan for clearance (CL) and volume of distribution (V) were determined.

For actual body weight, PPK estimates of CL and V were 4.04 L/hr per 20 kg (3.37 mL per min per kg; interpatient variability 23%); and 12.8 L per 20 kg (0.64 L per kg; interpatient variability 11%).

Formulary and pricing (Philippines)

Check availability

Prices and stock vary by branch; renalcarematters.com does not sell medicines or receive payment from pharmacies.

References

  1. U.S. Food and Drug Administration. Busulfan · Eugia US LLC [US FDA-approved label, version 1, June 27, 2024]. Via DailyMed/openFDA. https://dailymed.nlm.nih.gov/dailymed/drugInfo.cfm?setid=06883ac0-4b2a-4f26-89bf-512d37b9ba7f
  2. Food and Drug Administration Philippines. Verification portal (product registrations). https://verification.fda.gov.ph

This page shows official label and registry text only; no renalcarematters.com clinical summary has been approved for it yet.

For health professionals. This page is a reference compiled from public regulatory sources for licensed health professionals in the Philippines. Verify every product detail against the current Philippine package insert and the FDA Philippines registration record. Information here is not a substitute for clinical judgment and does not replace the prescribing information approved for the specific product you dispense or prescribe.

Last updated: .